Welding is used in many industries. In tank and container construction, vehicle superstructures, wagon construction, shipyards, pipeline construction - stable, permanent joints are essential everywhere. And this can only be achieved if the work is done cleanly. A botched seam can have far-reaching consequences and is relevant to safety.
Welding is used in many industries. In tank and container construction, vehicle superstructures, wagon construction, shipyards, pipeline construction - stable, permanent joints are essential everywhere. And this can only be achieved if the work is done cleanly. Botched seams can have far-reaching consequences and are relevant to safety. The use of quality tools, careful work and many years of experience are the best basis for approaching joining by welding correctly.
Regardless of the welding process used (TIG, MIG, MAG, plasma, electrodes), welders resort to surface preparation tools when chamfering the edge, preparing the weld zone or cleaning the welding layers.
Welding professionals know their craft and usually do not need to make corrections. In addition to proper technique, cleaning is key to removing slag inclusions between weld beads or spatter before applying the next weld ply. Bond defects, cracks or overlap? Then it may be necessary to grind out weld ply or level welds.
Non-woven abrasive web is wound around a core and specially treated, resulting in a consistent hardness and level of abrasion over the life of the product. This convolute product is perfect for light deburring. An arrow indicates the direction in which the wheels must be used. Blend and Finish wheels have an open mesh construction that is ideal for cleaning prior to coating applications.
Specially designed to brush down-hole, internal surfaces and other hard-to-reach areas. Designed with Osborn’s proprietary TufWire™ wire strands to provide effective brushing, this product can be mounted singly or in multiples, directly onto the shaft of a portable tool to accommodate a wide variety of tasks.
Constructed with high-quality nylon filament with choice of Silicon Carbide or Ceramic abrasive, Osborn’s small diameter ATB Ringlock™ Wheel Brushes are ideal for a variety of tasks using portable tools and drill presses. Silicon Carbide brushes tackle a variety of cleaning and deburring both ID and OD surfaces while Ceramic brushes are designed for more aggressive deburring applications. Brushes are expertly designed and tested to provide unmatched longevity.
Osborn’s Small Diameter Nylon Wheel Brush features durable synthetic filaments that are tough enough to remove burrs, scale, rust, carbon, corrosion, and plastic flash. Flexible, non-metallic fill material makes it an ideal choice for materials that would typically be damaged by wire brushes. Made in the USA.
This hard-working square-trimmed brush features rugged crimped steel wire to efficiently brush both the bottom and sides of a hole in a single operation. Provides quick, uniform cleaning of internal surfaces, and can be used in drill presses and portable tools. Ideal for removing fine burrs from the edges of cross-drilled holes and spot facing.
The power and premium quality of an Osborn TY™ Encapsulated Wheel Brush sized down to fit hand-held air and electric tools such as pencil grinders. Ideal for confined areas, flash/rust removal, and aggressive deburring in tight spots. Made in the USA.
Designed to clean and deburr the narrowest of areas, Osborn Crimped Wire Narrow Face Wheel Brushes offer a flexible solution for a variety of spaces. These brushes can also be mounted in multiples to tackle wider surfaces to remove paint or produce antique finishes. All varieties feature Osborn’s proprietary TufWire™ to ensure uniform performance and extended lifespan. Note that all 3/8”-5/8” and ½”-5/8” arbor holes are supplied with a removable adapter.
Featuring our uniform and densely packed TufWire™, Osborn Crimped Wire Wheel Brushes are designed for internal/external cleaning and deburring tasks. These come standard with attached ¼” diameter shanks for use with die grinders or stationary drill presses.
Crimped Concave Wire Wheel Brush with Shank
Constructed of Osborn’s proprietary TufWire™, Crimped Wire Medium Face Wheel Brushes are flexible, yet aggressive to tackle a variety of tasks with ease. Can be used individually or mounted in multiples for addressing wide areas. The unique design of TufWire™ also ensures an exceptionally long brush life with consistent performance from start to finish.
Combining Osborn’s proprietary TufWire™ construction with a wider face width, Crimped Wire Wide Face Wheel Brushes provide quick, efficient brushing on production work and general maintenance tasks. As with all Osborn TufWire™ products, brushes are designed for consistent performance and longevity to save you time and money. Wheels fit directly onto 2” diameter arbors without adapters. Use of the adapter kit is required for other arbor sizes.
Featuring efficient Silicon Carbide or aggressive Ceramic abrasives and a wide face width, Osborn ATB Master™ Wheel Brushes are highly effective on both metallic and non-metallic materials. Cutting action does not require compound, eliminating the need to clean finished parts to save you time and money. Designed with premium Round Crimped nylon filaments to offer the industry’s longest brush life. Brushes can be used singly, or can be mounted in multiples for larger surfaces.